Description
Racks can be designed & manufactured to suit any requirements.
HRF Racks
Request A QuoteYou May Also Like
Read MorePortable Single Diver Specifications
- The DV1C2 is a portable single diver video capture and two diver communications system.
- The unit can be run on 100-240VAC 50/60Hz via an earth leakage circuit breaker and has a built in Lithium Ion Cobalt battery (25.9VDC 6.9Ah) as a backup in case of mains failure.
- Camera output voltage is 24V DC (nominal).
- LED Light output voltage is 24V DC (nominal) and dimming voltage is 24 – 0V D
Read MoreEnclosure
Size : 2U (88mm x 482mm x 280mm HxWxD)
Electrical
Input Voltage: 100-240V AC
Frequency: 47-63HzRecording is via an Intel NUC i3 with a 1000GB (1TB) SSHD & 8 GB RAM.
The system will record 116 hours of two diver recordings at 1920×1080 resolution.
Operating system is Linux with Rennisons proprietary video capture software.
The software is intuitive & very
Read MoreSpecifications
- The DV2C3 is a portable two diver video capture and three diver communications system.
- The unit can be run on 100-240VAC 50/60Hz via an earth leakage circuit breaker and has a built in Lithium Ion Phosphate battery (25.6VDC 6.4Ah) as a backup in case of mains failure. This changes over seamlessly & notifies the operator via the mains fail alarm.
- Mains fail alarm & battery status monitor on operating panel.
Read MoreCamera Control Unit Specifications
Features
Independent power supplies for each diver.
Short circuit, overload & voltage overload protection.
Output sockets on rear panel can be specified by the purchaser & configured as required.
Enclosure
Size: 2U (88mm x 482mm x 280mm HxWxD)
Electrical
Input Voltage: 88-264V AC